Audio Technica VM740ML Dual MM (MicroLine stylus) cartridge Japan, Made in Japan

Description

This is one piece Brand New In Box, Not Used Before 100% Authentic
Audio-Technica
VM740ML
MicroLine® stylus Stereo Cartridge, coming with Shibata Stylus
, Made in Japan.
Audio-Technica's internationally-patented dual magnet design replicates the structure of the cutter head.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned polymer to match the position of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.
Para-toroidal generating system
Para-toroidal coils improve generating efficiency and offer superb linearity.  Since leakage of magnetic flux in this continuous and unitized magnetic circuit is low. The permeability of the cores is of thus optimized through the use of laminated cores.
Centre shield plate reduces crosstalk
A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.
VM740ML MicroLine® stylus cartridge is a premier 700 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM740ML is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s MicroLine® stylus allows it to trace the record groove with incredible accuracy, resulting in the nuanced audio reproduction that elliptical and conical styli simply can’t match. The stylus’s multilevel shape also wears better than other styli, while reducing the wear on your records. Includes mounting hardware.
VM dual magnet cartridge with MicroLine® stylus
Aluminum tapered cantilever
Paratoroidal coils improve generating efficiency
Center shield plate between the left and right channels reduces crosstalk
Die-cast aluminum alloy housing reduces vibration and adds a natural electrical shield
Specifications: -
Frequency Response
20-27,000 Hz
Channel Separation
28 dB (1 kHz)
Vertical Tracking Force
1.8-2.2 g (2.0 g standard)
Stylus Construction
Nude square shank
Recommended Load Impedance
47,000 ohms
Output
4.0 mV (at 1 kHz, 5 cm/sec)
Channel Balance
1.0 dB (1 kHz)
Stylus Shape
2.2 x 0.12 mil MicroLine®
Cantilever
Aluminum tapered pipe
Mount
Half-inch
Replacement Stylus
VMN40ML
Coil Impedance
: 2,700 ohms (1 kHz)
DC Resistance
: 800 ohms
Load Capacitance
: 100-200 pF
Coil Inductance
: 460 mH (1 kHz)
Static Compliance
: 40 x 10-6 cm/dyne
Dynamic Compliance
: 10 x 10-6 cm/dyne (100 Hz)
Vertical Tracking Angle
: 23°
Dimensions
: 17.3 mm (0.7") H x 17.0 mm (0.7") W x 28.2 mm (1.1") D
Weight
: 8.0 g (0.3 oz)
Accessories Included
: Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts, non-magnetic screwdriver, brush, lead wire set
WORLDWIDE SHIPPING BY AIR PARCEL WITH TRACKING INFORMATION AT US.00
Price does not include your country's (Destination) import Tax and VAT.
If you have any questions, please do not hesitate to contact me.